Qixing Industrial Corporation.
Professional Manufacturer of Wall Board Equipment in China.
QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line
Products » QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line
Production Line Introduction

The cast-in-place concrete perpetual composite insulation wallboard are normally used as outer wall insulation wallboard, with inner wall filled with concrete. The outer side is plastered with cement grout, while QX high-performance concrete composite self-insulation wallboard is connected with concrete body closely through adapting pieces which ensure insulation system stability of the whole building.

Running System:
QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

1. Whole colsed storage and feeding system

Storage soli, made by thicken steel plateand and welded by automatic submerged-arc with plus dust remover on top which ensure durable usage, dust-free, safety and beautiful appearance, also reducing cost for free from changing filter as the traditional machine do.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

2. Spiral conveyor

Spiral blade made by once forming manganese steel with high abrasive resistance property, and long duration, and small gap between inner wall and blades.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

3. Bucket elevator

Vertical conveyed in high efficiency with less area occupied and free from environmental pollution.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

4. Automatic Calculation

Precise calculation avoid material wasting with less labor needed, closed-running system reducing environmental pollution.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

5. Dry powder mortar preblending system

30% material cost will be saved compared with buy preblending material directly, and come into systematic running with less labor required.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

6. Automatic dry-mixed mortar seperation system

Automatic calculatin and precise distribution in closed cyclic running system to ensure dust-free, accuracy and high efficiency.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

7. Spiral ribbon mixer

Mix dry powder mortar with water speedily and automatically in large volume with few residue left to ensure material initial state and equipment steady running.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

8. Production line running system

Distribute material uniformly and arrange web automatically, converyed by belt without deviation and reducing vulnerable parts abrasion, also increase good products ratio. Compatible with lightweight wallboard, steel wire frame, composite self-insulatin wallboard prodcing.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

9. Automatic output system

High automatic running to meet once composite and twice compostie cyclic production requirement, and avoid damage on product in transportation, as well require less labor.

QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line

10. Automatic reversal system

High automatic running system avoid damage on product and require less labor.

Production Line Advantage

Easy construction technology applied and popularized in large scale is possible.

Sealed cyclic design, automatic weighing, concise material allocation, dust-free and environmental.

Automatic line can produce steel grid insulation wallboard simultaneously.

Automatic wallboard reversing.

Automatic maintain, cutting, made-up and stacking system required low labor with only 4-5 people was enough.

Over 2,000 square meters could be produced in one-shift, every workman access to higher capacity with lower cost.

Picture of Wallboard
QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line
Technical Parameter

Testing Item

Unit

Standard

Result

Surface density

kg/m2

≤30

23.8

Shock resistence
strength

J

≥ 10.0

Ten points shocked under 10.0J without damage

Flexural capacity

N

≥2000

3922

Tensile cementing intensity (with XPS board)

Original intensity

MPa

≥0.20

0.23

Water proof

 

≥0.20

0.22

Anti-freezing&thawing

 

≥0.20

0.20

Product Characteristic

Easy construction technology applied and popularized in large scale is possible.

Thermal insulation enjoy same lifespan with building structure.

Multilayered structure design with strong intensity.

Heat preservation and fire resistance property.

Precast project ensure high quality.

Technical Support

Before sales service

1. Non-standard equipment customized.

2. Issue technical drawings of equipment.

3. Design scheme for factory construction freely.

4. Design scheme for equipment layout freely.

On purchase service

1. Recommend raw material supplier.

2. Provide raw material list & technical index.

3. Provide technical formula.

4. Optimized technical formula in assistance.

5. Proved drawings of auxiliary equipment.

6. Manual for equipment operation provided.

7. Installation instrurction & debugging for polit production on site.

8. Workers training on site.

After sales service

1. Free maintenance.

2. Change vulnerable parts in replacement by old one in guarantee period.

3. Auxiliary parts provided in lifetime.

4. Technical support for equipment in lifetime.

5. Technical support for technical upgrade.

6. Technical support for wallboard installation.

Patents & Certification
QX Cast-in-place Concrete Perpetual Composite Insulation Wallboards Production Line
Other Products
Welcome to send your message to us
*Email
!!
*Content
!
Product Name
Your Name
Company
Tel/Fax.
Msn/Skype