Qixing Industrial Corporation.
Professional Manufacturer of Wall Board Equipment in China.
QX Lightweight Wallboard Shaping Equipment
Products » QX Lightweight Wallboard Shaping Equipment
QX Lightweight Wallboard Shaping Equipment
Introduction to QX Lightweight Wallboard Shaping Equipment

Two type lightweight wallboard production line exist in market at present, one is extruding lightweight wallboard shaping machine, another is traditional type of battery-mold shaping machine, both of them facing many problems. For extrude type, required more land area, and higher entrainment degree(concrete floor within 2mm flatness tolerance) of floor which was difficult to realize, and its natural transformation and maintain difficulty increase its inconvenience. Furthermore, its producing technique required semi-dry material and can not ensure sufficient hydrating reaction, and cause to lower intensity as well higher volume weight. Ribs arranged along two sides with tensed by worker underneath, and rolled out randomly cause to different stress in two sides and easy transformation.

While traditional battery mold process required perlite as light filler, which cause to thicker slurry with low fluidity and low batching efficiency. And the forming wallboard with low smoothness & flatness on surface, with empty hole and poor compactness easy occurred.

In consideration of above shortcomings, Shandong Qixing developed new wallboard producing equipment base on new technology, which covered QX-Ⅰmechanical light wallboard shaping machine, QX-Ⅱelectronic light wallboard shaping machine and QX-Ⅲ hydraulic mechanical light wallboard shaping machine with national patent certificated, and passed authentication from Construction Department of Shandong Province, as well designated for further popularization equipment for its outstanding performance such as lower volume weight, higher intensity, not easy transformed and cracking on welding line after installation.

1. Unique double-groove technology prevent cracking in installation.

2. High granularity, good flatness, and long durability without transformation.

3. Automatic control feedback system can be heated by electricity, water and gas.

4. Adjustable thickness & length.

5. Plastic core tube free from washing, advanced electric extraction pipe.

6. Automatic open-close mold.

7. Kinds of GRC, ceram material lightweight wallboard could be produced.

QX-ⅠHydraulic Lightweight Wallboard Shaping Machine

QX—ⅠA (Mechanical): Max Shaping Length: 3500mm, Thickness of Shaping Wallborad 90 mm, 120 mm Block Nos of Shaping Wallboard: 8 blocks, Outter Dimension: 2100×3600×1100mm Weight of Equipment: 5.3T.

QX—ⅠB (Mechanical): Max Shaping Length: 3500mm Thickness of Shaping Wallborad 90 mm, 120 mm Block Nos of Shaping Wallboard 10 blocks, Outter Dimension: 2500×3600×1100mm, Weight of Equipment: 6.3T.

QX-Ⅲ Mechanical Lightweight Wallboard Shaping Machine

QX—ⅢA (Hydraulic) Max Shaping Length: 3500mm, Thickness of Shaping Wallboard: 90 mm、120 mm Block Nos of Shaping Wallboard: 8 blocks, Outter Dimension: 2100×3600×1100, Weight of equipment: 6.5T, Motor Power: 2.2KW, Heat Power: 14.4KW, Vibrator power: 1.1KW, Supply Voltage: 380V, Max Pressure of System: 25kg/square centimeter.

QX—ⅢV (Hydraulic) Max Shaping Length: 3500mm, Thickness of Shaping Wallboard: 90 mm、120 mm, Block Nos of Shaping Wallboard: 10 blocks, Outter Dimension: 2500×3600×1100, Weight: 6.5T, Motor Power: 2.2KW, Heating Power: 17.6KW, Vibrator Motor Power: 1.1KW, Supply Voltage: 380V, Max System Pressure: 25kg/square centimeter.

Technical Support

Before sales service

1. Non-standard equipment customized.

2. Issue technical drawings of equipment.

3. Design scheme for factory construction freely.

4. Design scheme for equipment layout freely.

On purchase service

1. Recommend raw material supplier.

2. Provide raw material list & technical index.

3. Provide technical formula.

4. Optimized technical formula in assistance.

5. Proved drawings of auxiliary equipment.

6. Manual for equipment operation provided.

7. Installation instrurction & debugging for polit production on site.

8. Workers training on site.

After sales service

1. Free maintenance.

2. Change vulnerable parts in replacement by old one in guarantee period.

3. Auxiliary parts provided in lifetime.

4. Technical support for equipment in lifetime.

5. Technical support for technical upgrade.

6. Technical support for wallboard installation.

Patents & Certification
QX Lightweight Wallboard Shaping Equipment
Other Products
Welcome to send your message to us
*Email
!!
*Content
!
Product Name
Your Name
Company
Tel/Fax.
Msn/Skype